Packet Tracer - Skills Integration Challenge
Addressing Table
Device
|
Interface
|
IP Address
|
Subnet Mask
|
S1
|
VLAN 1
|
10.10.10.2
|
255.255.255.0
|
PC1
|
NIC
|
10.10.10.10
|
255.255.255.0
|
PC2
|
NIC
|
10.10.10.11
|
255.255.255.0
|
Scenario
The network administrator asked you to configure a new switch. In this activity, you will use a list of requirements to configure the new switch with initial settings, SSH, and port security.
Requirements
· Configure S1 with the following initial settings:
- Hostname
- Banner that includes the word warning
- Console port login and password cisco
- Encrypted enable password of class
- Encrypt plain text passwords
- Management interface addressing
· Configure SSH to secure remote access with the following settings:
- Domain name of cisco.com
- RSA key-pair parameters to support SSH version 2
- Set SSH version 2
- User admin with password ccna
- VTY lines only accept SSH connections and use local login for authentication
· Configure the port security feature to restrict network access.
- Disable all unused ports.
- Set the interface mode to access.
- Enable port security to allow only two hosts per port.
- Record the MAC address in the running configuration.
- Ensure that port violations disable ports.
PENYELESAIAN :
· Configure S1 with the following initial settings:
- Hostname
- Banner that includes the word warning
- Console port login and password cisco
- Encrypt plain text passwords
- Management interface addressing
· Configure SSH to secure remote access with the following settings:
- Domain name of cisco.com
- RSA key-pair parameters to support SSH version 2
- Set SSH version 2
- User admin with password ccna
- VTY lines only accept SSH connections and use local login for authentication
· Configure the port security feature to restrict network access.
- Disable all unused ports.
- Set the interface mode to access.
- Enable port security to allow only two hosts per port.
- Record the MAC address in the running configuration.
- Ensure that port violations disable ports.
interface f0/1 :
interface f0/2 :
0 komentar: